1.            Preparations: (1) Select a wire rope with an appropriate diameter to ensure that it meets the requirements for use; (2) According to the actual application requirements, confirm the size and length of the non-joint wire rope loop, and make corresponding marks.

2.            The method of preparing the no-joint wire rope loop is as follows: (1) Fold the end of the wire rope into a loop from the front to ensure that the loops coincide with each other; (2) Pass a section of steel wire rope through the center of the other end loop from the side behind the loop to Form a "U" shape; (3) Pass this piece of wire rope through the center of the circle again to form two adjacent "U" shapes; (4) Continue to repeatedly pass the wire rope through the back of the circle to form a "U" (5) Finally, wrap the remaining wire rope around the braided loop, pass through the inner side of the wire rope and fix it to ensure that it is firmly fixed.

   The following points should be paid attention to in the preparation of the jointless wire rope loop: (1) The bending radius of the wire rope should meet the relevant standards to avoid excessive damage to the wire rope; (2) Each step of the wire rope threading must be accurate and firm to ensure The no-joint wire rope loop has sufficient strength and stability; (3) During the weaving process, auxiliary tools such as wire rope clamps can be used to maintain the stability and efficiency of weaving; (4) After the no-joint wire rope loop is completed, the Necessary inspection and testing to ensure fixing effect and safety.

   What needs to be emphasized is that when making jointless wire rope loops, you should refer to relevant technical standards and specifications, and operate in combination with actual conditions and usage requirements. Before specific operations, you can also consult professionals and relevant information to obtain more accurate preparation methods and suggestions.