1. Repeat braid (repeat section): Repeat braid is a simple and commonly used braid, suitable for larger diameter wire ropes. The specific rope braiding steps are as follows: (1) Fold the end of the wire rope into a loop, keeping the loop opening upward; (2) Pass the end through the loop opening to form a "U" shape; (3) Thread the end through the loop again (4) Repeat the above steps until the length of the braided end meets the requirements; (5) Finally, pass the end around the braided part and insert it into the inner side of the wire rope, and fix it firmly.

2.            Tridacna knot (single clam knot): The giant clam knot is a compact and strong rope braiding method, which is suitable for the case where the diameter of the steel wire rope is small. The specific rope braiding steps are as follows: (1) Fold the end of the wire rope into a loop, keeping the loop upward; (2) Pass the end through the loop to form a "U" shape; (3) Continue to pass the end through the loop After that, rotate 180 degrees around the original braided rope; (4) Put the end through the back of the loop to form a "7" shape; (5) Pass the end through the loop again, back to the beginning of the braided rope (6) Tighten the steel wire rope and the braided rope so that the braided rope head is tightly combined.

3.            Rope cut-back knot (cut-back head): The rope cut-back knot is a kind of rope braiding method commonly used in fiber ropes and steel wire ropes. It has a compact structure, is firm and reliable. The specific rope braiding steps are as follows: (1) Fold the end of the wire rope into a circle and keep the circle opening up; (2) Pass the end through the circle opening to form a "U" shape; (3) Rotate the end around the braided rope part for a circle , from the top of the braided rope again to form a "7" shape; (4) Pass the end out of the loop again, leaving a certain length; (5) Tighten the braided rope part and cut the end back Thread the inside of the wire rope.

   It should be noted that the braiding method of the wire rope head should be selected and operated according to the relevant technical standards and specifications in practical applications to ensure the firmness and safety of the braided rope head. At the same time, when weaving rope, it should be ensured that each step is completed accurately and firmly to avoid loosening or unraveling. Before the specific operation, you can also consult professionals and relevant information to obtain more accurate rope weaving methods and suggestions.