Production of stainless steel wire rope sample end The sample end of the

　　whole rope breaking tensile test should be fastened by alloy casting method, or thermosetting resin pouring and U-shaped and wedge-shaped rope clamps can be used to fasten to ensure the stainless steel wire rope test. , the mechanical properties are not affected.

　　First, the two ends of the stainless steel wire rope sample are bundled as required, and the length of the filling head left at both ends of the sample is 130-180mm. Loosen the remaining head into a broom head shape. Then put it in kerosene or gasoline to degrease, and cut off the fiber core near the root of the bundle. Then put it into 12-18% dilute hydrochloric acid solution for purification. The immersion time is generally 50-60 seconds. When the surface of the steel wire is observed to be gray, put the sample into the conical mold and cast it.

　　When cleaning stainless steel wire rope smooth steel wire, a small amount of zinc particles should be added to the hydrochloric acid solution.