Steel wire rope wrapping is a commonly used maintenance method to prevent problems such as twisting of the steel wire rope bridge and rolling of the mesh drum. The following are the detailed steps for wrapping the steel wire rope:

1、 Preparation work

Before winding the steel wire rope, it is necessary to prepare the necessary tools and materials. Prepare the necessary wire ropes and tools for winding, such as winding tools and wrenches. At the same time, it is necessary to pay attention to safety during the process of winding the steel wire rope, so it is necessary to wear personal protective equipment, such as gloves and goggles.

2、 Check the winding direction

Before conducting the wire rope winding operation, it is necessary to determine the direction of winding. The winding direction should be opposite to the rotation direction of the bridge. If the direction is not correct, after the steel wire rope is wrapped, the rotation direction of the bridge will be the same as the direction of the steel wire rope, which can easily lead to problems such as spiral rolling.

3、 Preparation before wrapping

Before starting to wrap, it is necessary to fix both ends of the steel wire rope on the bridge. The fixing method includes directly fixing the steel wire rope to the bridge or fixing it to the ground through a support frame. Tools such as bolts and hinges can be used to tie the steel wire rope onto the bridge to fix the position.

4、 Wrapping steel wire rope

Tools such as winding tools and wrenches can be used to wind steel wire ropes. Before winding the steel wire rope onto the bridge, it is necessary to first fix one end of the steel wire rope and lock it, then wind the steel wire rope onto the bridge, pull the steel wire rope in the direction of rotation, and maintain its tension state. During the winding process, it is necessary to pay attention to controlling the angle and direction of the winding to achieve the optimal winding state of the steel wire rope.

5、 Click Test

After the wire rope is wrapped, a click test is required to ensure that the wire rope is wrapped correctly and can operate normally. Click to test the need to rotate the bridge to its maximum angle, then stop it and use auditory and tactile senses to determine whether the wheel item is rolling. After confirming that there are no problems, normal operation can begin.

6、 Closing work

After completing the winding of the steel wire rope, it is necessary to complete the final work. Clean up the winding tools and work area, and thoroughly check whether the bridge, wire rope and other equipment are in normal condition. If problems are found during operation, such as poor wrapping of the steel wire rope or incorrect wrapping direction, they need to be adjusted and corrected in a timely manner.

In short, wire rope wrapping is a commonly used maintenance method that can prevent problems such as twisting of the wire rope bridge and rolling of the mesh drum. During operation, it is necessary to pay attention to safety, correctly wrap the steel wire rope, and conduct click testing to ensure correct operation.