During the use of steel wire ropes, due to factors such as long-term weight bearing and transportation friction, the direction of weaving and twisting in the steel wire rope may be reversed, resulting in uneven deformation of the steel wire rope and a decrease in its load-bearing capacity. The operation process of wire rope twisting is to correct the reverse problem of the weaving and twisting direction of the wire rope, so as to return it to its normal state and improve the service life and safety of the wire rope. The following will provide a detailed introduction based on the basic principle and operating steps of wire rope twisting.

1、 The basic principle of wire rope twisting

The principle of wire rope twisting is based on the problem of reverse twisting direction of the wire rope, using forward deflection and fixation of the wire rope to return the weaving twisting direction to the normal state. Therefore, the basic principle of wire rope twisting is to use intermittent traction to deflect all the steel wires of the wire rope in the positive direction based on the problem of reverse twisting direction of the wire rope, so as to return the twisting direction to the normal state. When dealing with reverse weaving problems, the principle of forward twisting is based on the need to re twist the steel wire rope to a state that is consistent with the original twisting direction.

2、 Operating Steps for Twisting Steel Wire Rope

1. Preparation work

Before starting the twisting of the steel wire rope, appropriate preparations need to be made. Firstly, the length, diameter, and manufacturing date of the steel wire rope should be checked to eliminate any damage or defects that may cause accidents. Then, it is necessary to determine the reverse weaving direction of the steel wire rope. Finally, we need to prepare corresponding twisting tools and materials.

2. Traction and twisting

The basic step of wire rope twisting is traction twisting, which can be operated by professional wire rope twisting machines, as well as manual tools and auxiliary equipment. Usually, manual tools are more suitable for pulling and twisting small and medium-sized steel wire ropes.

3. Forward deflection fixation

When conducting the wire rope twisting operation, it is necessary to use chain links or other fixed tools for forward deflection fixation to ensure that the wire rope twisting direction does not deviate from the traction direction. Pincers, wrenches, or wire rope special tools can be used for fixation.

4. Repeat operation

To achieve optimal results, this operation needs to be repeated several times. During the operation, every section of wire rope needs to be fixed to ensure the correct direction and stability of the twisting. After the global or local processing is completed, check whether all wire ropes have completely returned to the normal twisting direction. If the length of the twisting is large or the wire rope is severely damaged, it may be necessary to repeat steps 2 to 4 several times or use professional equipment.

5. End

After completing the wire rope twisting operation, a comprehensive inspection of the wire rope is required. If any defects or issues are discovered, they should be promptly resolved to ensure the service life and safety of the wire rope.