Steel wire rope is a type of equipment widely used in industrial applications such as lifting, traction, and support. To ensure their performance and lifespan, regular maintenance and upkeep are required. One of the important maintenance tasks is to apply oil to protect the surface of the steel wire rope from damage such as oxidation, corrosion, and wear. So, how to apply oil correctly? In this article, we will provide a detailed introduction to the steps and precautions for applying oil.

Step 1: Clean the surface of the wire rope

Before applying oil, the surface of the wire rope must be cleaned first. This can effectively remove hard scale, soil, dust, and other impurities. Warm water and soap, or some specialized cleaning agents can be used during the washing process. Please note that do not use any acidic or alkaline cleaning agents as they may damage the surface of the wire rope. At the same time, do not use a wire brush or metal tools to clean the surface of the wire rope, as this will damage the surface of the germanium stranded wire and wire rope.

Step 2: Select the appropriate lubricating oil

Before applying oil, it is necessary to choose a suitable lubricant for the steel wire rope. Generally speaking, a suitable lubricating oil should have good antioxidant, rust and wear resistance. The selection of lubricating oil should be based on factors such as the application of the steel wire rope, environmental conditions, and frequency of use.

Step 3: Apply oil

When applying oil, it is first necessary to pour the lubricating oil into the container and soak the steel wire rope. While soaking, the surface of the wire rope should be wiped with hands and a cloth to fully apply lubricating oil to the surface of the wire rope. When wiping, care should be taken not to break, twist, or wrap the wire rope.

Step 4: Clean excess lubricating oil

During the oiling process, sometimes too much lubricating oil may be applied, resulting in excess oil stains on the surface of the wire rope. In this case, excess lubricating oil must be cleaned. A common method is to wipe the surface of the steel wire rope with a cotton cloth to absorb excess lubricating oil. For oil stains that are difficult to remove on the surface, some cleaning agents can also be used for cleaning. After cleaning, it is best to air the wire rope for a period of time until it is completely dry.

matters needing attention:

Before applying oil, it is necessary to clean and dry the steel wire rope to prevent oil stains from adhering to soil, dust, and other pollutants;

2. Choosing a suitable lubricating oil is very important, and factors such as the application, environmental conditions, and frequency of use of the steel wire rope should be comprehensively considered to choose a suitable lubricating oil.

3. When applying oil, be careful not to let lubricating oil drip into the interior of the rope core. At the end of the wire rope, special care should be taken not to allow lubricating oil to flow onto the snap ring. This will reduce the torque of the wire rope, thereby affecting its performance.

After applying oil, the containers and tools used for soaking and applying oil should be carefully cleaned to avoid leaving oil stains on them. Uncleaned tools can cause cross contamination and affect the service life of steel wire ropes.

In short, regular oiling is an important step to ensure that the surface of the steel wire rope remains smooth and free from damage. The correct oiling procedure can prolong the service life and safety of steel wire ropes. Therefore, before applying oil, it is necessary to have a detailed understanding of the steps and precautions for applying oil, and follow the correct oil application procedure.