The steel wire rope buckle is a clamp used to connect the steel wire rope, which is widely used in lifting, transportation, construction and other fields. Correct use of wire rope buckle can effectively ensure safety and service life. The following describes the correct fastening method of the wire rope buckle.

Step 1: Preparation

Before using the wire rope buckle, its specification, model and bearing capacity must be determined to select a suitable clamp. The end of the wire rope needs to be processed before use, including tightening both ends of the wire rope to ensure that there is no looseness.

Step 2: Installation

Open both ends of the wire rope buckle, then put the wire rope into the fixture and twist the wire rope into a spiral shape. At this time, the wire rope should be wrapped inside the wire rope buckle, not outside the buckle. At this time, it is necessary to ensure that there are no impurities and obstacles between the wire rope and the buckle.

Step 3: Fasten

Use a wrench or other tools to fasten the wire rope buckle. When you feel too tight, you can stop. Both ends of the wire rope should be evenly stressed to avoid deformation or damage. Do not use excessive force during tightening, otherwise the wire rope will be deformed.

Step 4: Check

After fastening the wire rope buckle, be sure to check to ensure there is no error. Special items to be inspected include the tightness of the wire rope buckle, the diameter of the wire rope, the model of the wire rope buckle and whether the surface is damaged. When the above aspects are checked and there are no problems, they can be used.

The wire rope buckle is an important industrial fixture, which can ensure the safety and stability of the work. Therefore, the correct use method is very important. The safety and service life of articles can be guaranteed by following the correct use method.