What are the detailed steps of wire rope knitting?

Manual knitting the method of manually inserting and knitting six strand steel wire rope with alternating twist fiber rope core or metal rope core to make sling buckle with collar is also applicable to buckle without collar.

Method 1: the connector is made by five times of insertion, which can be composed of three times of whole strand insertion and two times of reduced strand insertion. All plug-in joints should be opposite to the twisting direction of the steel wire rope; Except for the first group, the tail ends of all strands inserted in other groups shall be opposite to the twisting direction of the steel wire rope.

Method 2 The interleaving should be carried out in the way of one up and one down.

Method 3 If the steel wire rope has a fiber main core, the core shall be completely penetrated with the first tail end of the first group, and then the exposed core shall be cut off. If the strand has a fiber core, the strand core should remain in the original strand.

Method 4 If the steel wire rope has an independent metal wire rope core, the core shall be divided into three parts, namely: two strands; Two shares; Two strands add their cores. The three parts shall be spliced with three staggered tails, and only through the three complete connectors.

Method 5 If the steel wire rope has an independent wire strand core, this core should be folded inward during the first group of threading, and then fully inserted upward into the center of the splicing head for five complete penetrations.

Method 6 All insertion shall be firmly tightened until it is consistent with the center line of the inserted steel wire rope. In order to make the inserted parts smooth and round, appropriate tools should be used for shaping to make them enter the appropriate position.

Preparation 1 The collar shall be clamped on the vice and the wire rope shall pass through the collar so that the main part of the wire rope is on the right and the free end is on the left.

Preparation 2 The steel wire rope shall be tied on the collar at the top of the ring and on both sides of the collar, or they shall be fixed with the collar clamp.

Preparation 3 Untie the strands of the wire rope. The strand end of the undeformed steel wire rope shall be firmly bound.